Water_Heater

View of the cold supply entering the heater and the hot supply to the sink faucet. Note the heater is mounted on its back. The design of the heater makes it easy to mount the unit in almost any position, making placement in the limited space of the underseat easier. This unit is placed in the rear drivers side storage area underneath the left seating unit.

The grey line is the cold water feed to the sink. It has had a tee installed and the white tubing is 3/8 Pex, which is the cold water supply to the water heater.

The is the view of the underside of the sink, showing the as-yet-not connected hot supply to the hot faucet. A 3/8 Pex coupling was used here to connect the hot water supply. The end of the line has a 3/8 Pex end coupling, screwed onto the end of the tubing and the end of the hot faucet

View of the cold supply entering the heater and the hot supply to the sink faucet. Note the heater is mounted on its back. The design of the heater makes it easy to mount the unit in almost any position, making placement in the limited space of the underseat easier. This unit is placed in the rear drivers side storage area underneath the left seating unit.

The orange cable is the new 110v, 12/2 with ground electric supply. Not installed yet is the 20 amp breaker which this end of the cable connects to and provides service to the heater and an additional outlet that was aded at the same time.

Total images: 5  |  Last update: 8/23/06 10:53 AM  |  Return to Main Page  |  Generated by JAlbum 6.5 & Chameleon skin  |  Help